WV--College- and Career-Readiness Standards
RQ.M.1HS8.4: Interpret expressions that represent a quantity in terms of its context.
RQ.M.1HS8.4.a: Interpret parts of an expression, such as terms, factors, and coefficients.
RQ.M.1HS8.5: Create equations and inequalities in one variable and use them to solve problems. Include equations arising from linear and quadratic functions and simple rational and exponential functions.
RQ.M.1HS8.6: Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales.
RQ.M.1HS8.7: Represent constraints by equations or inequalities, and by systems of equations and/or inequalities, and interpret solutions as viable or non-viable options in a modeling context. (e.g., Represent inequalities describing nutritional and cost constraints on combinations of different foods.)
RQ.M.1HS8.8: Rearrange formulas to highlight a quantity of interest, using the same reasoning as in solving equations. (e.g., Rearrange Ohm’s law V = IR to highlight resistance R.)
LER.M.1HS8.9: Understand that the graph of an equation in two variables is the set of all its solutions plotted in the coordinate plane, often forming a curve (which could be a line).
LER.M.1HS8.10: Explain why the x-coordinates of the points where the graphs of the equations y = f(x) and y = g(x) intersect are the solutions of the equation f(x) = g(x); find the solutions approximately, (e.g., using technology to graph the functions, make tables of values, or find successive approximations). Include cases where f(x) and/or g(x) are linear, polynomial, rational, absolute value exponential, and logarithmic functions.
LER.M.1HS8.11: Graph the solutions to a linear inequality in two variables as a half-plane (excluding the boundary in the case of a strict inequality) and graph the solution set to a system of linear inequalities in two variables as the intersection of the corresponding half-planes.
LER.M.1HS8.12: Understand that a function is a rule that assigns to each input exactly one output. The graph of a function is the set of ordered pairs consisting of an input and the corresponding output.
LER.M.1HS8.13: Compare properties of two functions each represented in a different way (algebraically, graphically, numerically in tables, or by verbal descriptions). (e.g., Given a linear function represented by a table of values and a linear function represented by an algebraic expression, determine which function has the greater rate of change.)
LER.M.1HS8.14: Interpret the equation y = mx + b as defining a linear function, whose graph is a straight line; give examples of functions that are not linear. (e.g., The function A = s² giving the area of a square as a function of its side length is not linear because its graph contains the points (1,1), (2,4) and (3,9), which are not on a straight line.)
LER.M.1HS8.15: Understand that a function from one set (called the domain) to another set (called the range) assigns to each element of the domain exactly one element of the range. If f is a function and x is an element of its domain, then f(x) denotes the output of f corresponding to the input x. The graph of f is the graph of the equation y = f(x).
LER.M.1HS8.17: Recognize that sequences are functions, sometimes defined recursively, whose domain is a subset of the integers. (e.g., The Fibonacci sequence is defined recursively by f(0) = f(1) = 1, f(n+1) = f(n)+ f(n-1) for n ≥ 1.)
LER.M.1HS8.18: Construct a function to model a linear relationship between two quantities. Determine the rate of change and initial value of the function from a description of a relationship or from two (x, y) values, including reading these from a table or from a graph. Interpret the rate of change and initial value of a linear function in terms of the situation it models, and in terms of its graph or a table of values.
LER.M.1HS8.19: Describe qualitatively the functional relationship between two quantities by analyzing a graph (e.g., where the function is increasing or decreasing, linear or nonlinear). Sketch a graph that exhibits the qualitative features of a function that has been described verbally.
LER.M.1HS8.20: For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities and sketch graphs showing key features given a verbal description of the relationship. Key features include: intercepts; intervals where the function is increasing, decreasing, positive or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.
LER.M.1HS8.21: Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes. (e.g., If the function h(n) gives the number of person-hours it takes to assemble n engines in a factory, then the positive integers would be an appropriate domain for the function.)
LER.M.1HS8.22: Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.
LER.M.1HS8.23: Graph functions expressed symbolically and show key features of the graph, by hand in simple cases and using technology for more complicated cases.
LER.M.1HS8.23.a: Graph linear and quadratic functions and show intercepts, maxima, and minima.
LER.M.1HS8.25: Write a function that describes a relationship between two quantities.
LER.M.1HS8.25.a: Determine an explicit expression, a recursive process or steps for calculation from a context.
LER.M.1HS8.25.b: Combine standard function types using arithmetic operations. (e.g., Build a function that models the temperature of a cooling body by adding a constant function to a decaying exponential, and relate these functions to the model.)
LER.M.1HS8.26: Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.
LER.M.1HS8.27: Identify the effect on the graph of replacing f(x) by f(x) + k, k f(x), f(kx), and f(x + k) for specific values of k (both positive and negative); find the value of k given the graphs. Experiment with cases and illustrate an explanation of the effects on the graph using technology. Include recognizing even and odd functions from their graphs and algebraic expressions for them.
LER.M.1HS8.28: Distinguish between situations that can be modeled with linear functions and with exponential functions.
LER.M.1HS8.28.a: Prove that linear functions grow by equal differences over equal intervals; exponential functions grow by equal factors over equal intervals.
LER.M.1HS8.28.b: Recognize situations in which one quantity changes at a constant rate per unit interval relative to another.
LER.M.1HS8.28.c: Recognize situations in which a quantity grows or decays by a constant percent rate per unit interval relative to another.
LER.M.1HS8.29: Construct linear and exponential functions, including arithmetic and geometric sequences, given a graph, a description of a relationship, or two input-output pairs (include reading these from a table).
LER.M.1HS8.30: Observe using graphs and tables that a quantity increasing exponentially eventually exceeds a quantity increasing linearly, quadratically, or (more generally) as a polynomial function.
LER.M.1HS8.31: Interpret the parameters in a linear or exponential function in terms of a context.
RE.M.1HS8.32: Explain each step in solving a simple equation as following from the equality of numbers asserted at the previous step, starting from the assumption that the original equation has a solution. Construct a viable argument to justify a solution method.
RE.M.1HS8.33: Solve linear equations and inequalities in one variable, including equations with coefficients represented by letters.
RE.M.1HS8.34: Analyze and solve pairs of simultaneous linear equations.
RE.M.1HS8.34.a: Understand that solutions to a system of two linear equations in two variables correspond to points of intersection of their graphs, because points of intersection satisfy both equations simultaneously.
RE.M.1HS8.35: Prove that, given a system of two equations in two variables, replacing one equation by the sum of that equation and a multiple of the other produces a system with the same solutions.
RE.M.1HS8.36: Solve systems of linear equations exactly and approximately (e.g., with graphs), focusing on pairs of linear equations in two variables.
DS.M.1HS8.37: Represent data with plots on the real number line (dot plots, histograms, and box plots).
DS.M.1HS8.38: Use statistics appropriate to the shape of the data distribution to compare center (median, mean) and spread (interquartile range, standard deviation) of two or more different data sets.
DS.M.1HS8.39: Interpret differences in shape, center and spread in the context of the data sets, accounting for possible effects of extreme data points (outliers).
DS.M.1HS8.40: Construct and interpret scatter plots for bivariate measurement data to investigate patterns of association between two quantities. Describe patterns such as clustering, outliers, positive or negative association, linear association and nonlinear association.
DS.M.1HS8.41: Know that straight lines are widely used to model relationships between two quantitative variables. For scatter plots that suggest a linear association, informally fit a straight line and informally assess the model fit by judging the closeness of the data points to the line.
DS.M.1HS8.42: Use the equation of a linear model to solve problems in the context of bivariate measurement data, interpreting the slope and intercept. (e.g., In a linear model for a biology experiment, interpret a slope of 1.5 cm/hr as meaning that an additional hour of sunlight each day is associated with an additional 1.5 cm in mature plant height.)
DS.M.1HS8.43: Understand that patterns of association can also be seen in bivariate categorical data by displaying frequencies and relative frequencies in a two-way table. Construct and interpret a two-way table summarizing data on two categorical variables collected from the same subjects. Use relative frequencies calculated for rows or columns to describe possible association between the two variables. (e.g., Collect data from students in your class on whether or not they have a curfew on school nights and whether or not they have assigned chores at home. Is there evidence that those who have a curfew also tend to have chores?)
DS.M.1HS8.44: Summarize categorical data for two categories in two-way frequency tables. Interpret relative frequencies in the context of the data (including joint, marginal and conditional relative frequencies). Recognize possible associations and trends in the data.
DS.M.1HS8.45: Represent data on two quantitative variables on a scatter plot, and describe how the variables are related.
DS.M.1HS8.45.a: Fit a function to the data; use functions fitted to data to solve problems in the context of the data. Use given functions or choose a function suggested by the context. Emphasize linear and exponential models.
DS.M.1HS8.45.b: Informally assess the fit of a function by plotting and analyzing residuals. (Focus should be on situations for which linear models are appropriate.)
DS.M.1HS8.45.c: Fit a linear function for scatter plots that suggest a linear association.
DS.M.1HS8.46: Interpret the slope (rate of change) and the intercept (constant term) of a linear model in the context of the data.
DS.M.1HS8.47: Compute (using technology) and interpret the correlation coefficient of a linear fit.
DS.M.1HS8.48: Distinguish between correlation and causation.
CPC.M.1HS8.49: Know precise definitions of angle, circle, perpendicular line, parallel line and line segment, based on the undefined notions of point, line, distance along a line, and distance around a circular arc.
CPC.M.1HS8.50: Represent transformations in the plane using, example, transparencies and geometry software; describe transformations as functions that take points in the plane as inputs and give other points as outputs. Compare transformations that preserve distance and angle to those that do not (e.g., translation versus horizontal stretch).
CPC.M.1HS8.51: Given a rectangle, parallelogram, trapezoid or regular polygon, describe the rotations and reflections that carry it onto itself.
CPC.M.1HS8.52: Develop definitions of rotations, reflections and translations in terms of angles, circles, perpendicular lines, parallel lines and line segments.
CPC.M.1HS8.53: Given a geometric figure and a rotation, reflection or translation draw the transformed figure using, e.g., graph paper, tracing paper or geometry software. Specify a sequence of transformations that will carry a given figure onto another.
CPC.M.1HS8.54: Use geometric descriptions of rigid motions to transform figures and to predict the effect of a given rigid motion on a given figure; given two figures, use the definition of congruence in terms of rigid motions to decide if they are congruent.
CPC.M.1HS8.57: Make formal geometric constructions with a variety of tools and methods (compass and straightedge, string, reflective devices, paper folding, dynamic geometric software, etc.). Copying a segment; copying an angle; bisecting a segment; bisecting an angle; constructing perpendicular lines, including the perpendicular bisector of a line segment; and constructing a line parallel to a given line through a point not on the line.
CPC.M.1HS8.58: Construct an equilateral triangle, a square and a regular hexagon inscribed in a circle.
CPC.M.1HS8.59: Explain a proof of the Pythagorean theorem and its converse.
CPC.M.1HS8.60: Apply the Pythagorean theorem to determine unknown side lengths in right triangles in real-world and mathematical problems in two and three dimensions.
CPC.M.1HS8.61: Apply the Pythagorean theorem to find the distance between two points in a coordinate system.
Correlation last revised: 4/7/2017